[Linux-Biella] Mi presento e vi chiedo aiuto per la pinnaclepctv200e usb
Eric Marciano
eric.marciano a gmail.com
Mer 17 Ott 2007 12:33:04 CEST
Scusate ma non avevo ancora postato gli esiti dei controlli che paul mi ha
consigliato ma gli avevo già fatti.
ecco lsusb:
Bus 004 Device 002: ID 2304:020e Pinnacle Systems, Inc. [hex]
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
vi posto qui l'ultima parte del dmesg:
-e70007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 27.594542] usbcore: registered new interface driver usbfs
[ 27.594584] usbcore: registered new interface driver hub
[ 27.594615] usbcore: registered new device driver usb
[ 27.595855] USB Universal Host Controller Interface driver v3.0
[ 27.596424] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 27.596429] PCI: setting IRQ 11 as level-triggered
[ 27.596435] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 27.596451] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 27.596705] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[ 27.596737] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000a800
[ 27.596967] usb usb1: configuration #1 chosen from 1 choice
[ 27.597003] hub 1-0:1.0: USB hub found
[ 27.597017] hub 1-0:1.0: 2 ports detected
[ 27.675533] SCSI subsystem initialized
[ 27.681709] libata version 2.21 loaded.
[ 27.701549] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 27.701557] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 27.701566] PCI: VIA VLink IRQ fixup for 0000:00:10.1, from 9 to 11
[ 27.701595] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 27.701643] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[ 27.701671] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000ac00
[ 27.701804] usb usb2: configuration #1 chosen from 1 choice
[ 27.701840] hub 2-0:1.0: USB hub found
[ 27.701853] hub 2-0:1.0: 2 ports detected
[ 27.712747] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 27.712756] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 27.805028] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 10
(level, low) -> IRQ 10
[ 27.805050] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 27.805089] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 3
[ 27.805118] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000b000
[ 27.805266] usb usb3: configuration #1 chosen from 1 choice
[ 27.805301] hub 3-0:1.0: USB hub found
[ 27.805316] hub 3-0:1.0: 2 ports detected
[ 27.893574] FDC 0 is a post-1991 82077
[ 27.912131] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 27.912140] PCI: setting IRQ 5 as level-triggered
[ 27.912146] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5
(level, low) -> IRQ 5
[ 27.912168] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 27.912235] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 4
[ 27.912314] ehci_hcd 0000:00:10.3: irq 5, io mem 0xe7001000
[ 27.912322] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 27.912471] usb usb4: configuration #1 chosen from 1 choice
[ 27.912519] hub 4-0:1.0: USB hub found
[ 27.912533] hub 4-0:1.0: 6 ports detected
[ 28.019760] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 28.019770] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 28.020831] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 28.020863] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 28.020872] PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11
[ 28.020901] VP_IDE: chipset revision 6
[ 28.020904] VP_IDE: not 100% native mode: will probe irqs later
[ 28.020917] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on
pci0000:00:11.1
[ 28.020927] ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA,
hdb:DMA
[ 28.020943] ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA,
hdd:pio
[ 28.020952] Probing IDE interface ide0...
[ 4.300000] Marking TSC unstable due to: possible TSC halt in C2.
[ 4.316000] Time: acpi_pm clocksource has been installed.
[ 4.668000] hda: Maxtor 6E040L0, ATA DISK drive
[ 4.940000] usb 4-4: new high speed USB device using ehci_hcd and address
2
[ 5.072000] usb 4-4: configuration #1 chosen from 1 choice
[ 5.096000] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00110666455555c4]
[ 5.116000] hdb: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
[ 5.176000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.880000] Probing IDE interface ide1...
[ 6.296000] hdc: QUANTUM FIREBALLP LM20.5, ATA DISK drive
[ 6.968000] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.972000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 6.976000] eth0: VIA Rhine II at 0x1c000, 00:01:29:4e:1f:b6, IRQ 11.
[ 6.980000] eth0: MII PHY found at address 1, status 0x786d advertising
05e1 Link 45e1.
[ 6.988000] hda: max request size: 128KiB
[ 7.008000] hda: 80293248 sectors (41110 MB) w/2048KiB Cache,
CHS=65535/16/63, UDMA(133)
[ 7.008000] hda: cache flushes supported
[ 7.008000] hda: hda1 hda2 hda3 < hda5 >
[ 7.040000] hdc: max request size: 128KiB
[ 7.040000] hdc: 40132503 sectors (20547 MB) w/1900KiB Cache,
CHS=39813/16/63, UDMA(33)
[ 7.040000] hdc: cache flushes not supported
[ 7.040000] hdc: hdc1
[ 7.064000] hdb: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
[ 7.064000] Uniform CD-ROM driver Revision: 3.20
[ 7.144000] spurious 8259A interrupt: IRQ7.
[ 7.344000] Attempting manual resume
[ 7.344000] swsusp: Resume From Partition 3:5
[ 7.344000] PM: Checking swsusp image.
[ 7.344000] PM: Resume from disk failed.
[ 7.392000] kjournald starting. Commit interval 5 seconds
[ 7.392000] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.712000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.756000] Netfilter messages via NETLINK v0.30.
[ 14.780000] nf_conntrack version 0.5.0 (4095 buckets, 32760 max)
[ 17.480000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.544000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 17.548000] agpgart: AGP aperture is 64M @ 0xe0000000
[ 17.608000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.700000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.664000] irda_init()
[ 18.664000] NET: Registered protocol family 23
[ 18.912000] nvidia: module license 'NVIDIA' taints kernel.
[ 19.176000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 19.176000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon
Apr 16 20:20:06 PDT 2007
[ 19.644000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 19.648000] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.648000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.648000] input: PC Speaker as /class/input/input3
[ 20.016000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10
(level, low) -> IRQ 10
[ 20.016000] PCI: VIA VLink IRQ fixup for 0000:00:11.5, from 5 to 10
[ 20.016000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 21.504000] lp0: using parport0 (interrupt-driven).
[ 21.600000] Adding 730916k swap on /dev/hda5. Priority:-1 extents:1
across:730916k
[ 21.880000] EXT3 FS on hda2, internal journal
[ 23.452000] No dock devices found.
[ 23.664000] input: Power Button (FF) as /class/input/input4
[ 23.668000] ACPI: Power Button (FF) [PWRF]
[ 23.716000] input: Power Button (CM) as /class/input/input5
[ 23.724000] ACPI: Power Button (CM) [PWRB]
[ 23.768000] input: Sleep Button (CM) as /class/input/input6
[ 23.776000] ACPI: Sleep Button (CM) [SLPB]
[ 25.520000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 27.628000] ppdev: user-space parallel port driver
[ 28.132000] audit(1192615941.468:3): type=1503
operation="inode_permission" requested_mask="a" denied_mask="a"
name="/dev/tty" pid=4947 profile="/usr/sbin/cupsd"
[ 28.512000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 28.512000] apm: overridden by ACPI.
[ 28.692000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 28.696000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 28.696000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 31.192000] Failure registering capabilities with primary security
module.
[ 31.432000] Bluetooth: Core ver 2.11
[ 31.432000] NET: Registered protocol family 31
[ 31.432000] Bluetooth: HCI device and connection manager initialized
[ 31.432000] Bluetooth: HCI socket layer initialized
[ 31.452000] Bluetooth: L2CAP ver 2.8
[ 31.452000] Bluetooth: L2CAP socket layer initialized
[ 31.536000] Bluetooth: RFCOMM socket layer initialized
[ 31.536000] Bluetooth: RFCOMM TTY layer initialized
[ 31.536000] Bluetooth: RFCOMM ver 1.8
[ 37.304000] NET: Registered protocol family 17
[ 40.536000] NET: Registered protocol family 10
[ 40.544000] lo: Disabled Privacy Extensions
[ 50.612000] eth0: no IPv6 routers present
[ 368.512000] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:02:3f:14:b4:23:08:00 SRC=28.254.25.214 DST=
28.254.31.255 LEN=229 TOS=0x00 PREC=0x00 TTL=128 ID=10690 PROTO=UDP SPT=138
DPT=138 LEN=209
e infine lsmod:
lsmod
Module Size Used by
ipv6 273892 8
xt_limit 3584 8
xt_tcpudp 4224 10
ipt_LOG 7552 8
ipt_MASQUERADE 4608 0
ipt_TOS 3200 0
ipt_REJECT 5760 1
nf_conntrack_irc 8088 0
nf_conntrack_ftp 11136 0
xt_state 3456 6
af_packet 24840 2
binfmt_misc 12936 1
rfcomm 42136 2
l2cap 26240 11 rfcomm
bluetooth 57060 4 rfcomm,l2cap
ppdev 10244 0
cpufreq_userspace 5280 0
cpufreq_ondemand 9612 0
cpufreq_powersave 2688 0
cpufreq_conservative 8072 0
cpufreq_stats 7232 0
freq_table 5792 2 cpufreq_ondemand,cpufreq_stats
button 8976 0
video 18060 0
sbs 19592 0
ac 6148 0
dock 10656 0
container 5504 0
battery 11012 0
sbp2 24072 0
lp 12580 0
snd_via82xx 29336 1
snd_ac97_codec 100644 1 snd_via82xx
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 11400 2 snd_via82xx,snd_pcm
snd_mpu401_uart 9600 1 snd_via82xx
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi 9600 0
snd_rawmidi 25728 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
analog 13344 0
snd_seq 53232 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24324 2 snd_pcm,snd_seq
gameport 16776 2 snd_via82xx,analog
pcspkr 4224 0
snd_seq_device 9228 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_viapro 10004 0
via_ircc 27668 0
parport_pc 37412 1
parport 37448 3 ppdev,lp,parport_pc
nvidia 4716468 22
snd 54660 13
snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 39952 0
irda 202300 1 via_ircc
serio_raw 8068 0
i2c_core 26112 2 i2c_viapro,nvidia
soundcore 8800 1 snd
crc_ccitt 3072 1 irda
shpchp 34580 0
pci_hotplug 32704 1 shpchp
via_agp 11264 1
agpgart 35016 2 nvidia,via_agp
evdev 11136 4
iptable_nat 8708 0
nf_nat 20140 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 19724 8 iptable_nat
nf_conntrack 65288 7
ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink 6936 3 nf_nat,nf_conntrack_ipv4,nf_conntrack
iptable_mangle 3840 0
iptable_filter 3968 1
ip_tables 13924 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 16260 9
xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,xt_state,iptable_nat,ip_tables
ext3 133896 1
jbd 60456 1 ext3
mbcache 9732 1 ext3
ide_cd 32672 0
cdrom 37536 1 ide_cd
ide_disk 18560 3
via82cxxx 10372 0 [permanent]
ide_core 116804 3 ide_cd,ide_disk,via82cxxx
floppy 60004 0
via_rhine 25992 0
mii 6528 1 via_rhine
ata_generic 8452 0
libata 125168 1 ata_generic
scsi_mod 147084 2 sbp2,libata
ehci_hcd 36492 0
uhci_hcd 26640 0
usbcore 138632 3 ehci_hcd,uhci_hcd
ohci1394 36528 0
ieee1394 96312 2 sbp2,ohci1394
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 1
apparmor 40728 0
commoncap 8320 1 apparmor
Ho trovato delle cose che potrebbero fare per me su google ma non sono
riuscito ad installare il kernel.
se potreste darmi una mano passo passo..
Vi giro il link dove ho trovato li info
http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_200e
Grazie
Ciao eric
Il 17/10/07, Paul TT <paultt a bilug.linux.it> ha scritto:
>
> paultt a bilug.linux.it wrote:
> > ...
> > sei il nipote di rocky? venta fe 'tensiun alura :DDD
> > io ho giusto un pctv usb, non so piu' pero' quale sia il modello
> preciso.
> > non la ho ancora configurata, ma se attendi domani lo saprai, che avevo
> in
> > programma di farlo giusto stasera, dato che me la hanno passata solo
> > sabato.... :)
> > domani ti dico
> >
> >
> la mia e' una pctv usb2
> funzica cosi', con il modulo del kernel em28xx
> per dare piu' informazioni sulla tua scheda, puoi lanciare in un
> terminale:
> sudo lsusb
> e postare qui l'esito del comando?
> anche le ultime 20/30 righe emesse da dmesg potrebbero essere utili, e
> un lsmod
>
> --
> Non mi piacciono i tipi che mi hanno ucciso.
>
> _______________________________________________
> Linux mailing list
> Linux a ml.bilug.linux.it
> http://ml.bilug.linux.it/mailman/listinfo/linux
>
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: http://ml.bilug.linux.it/mailman/private/linux/attachments/20071017/4e4731e5/attachment-0001.html
Maggiori informazioni sulla lista
Linux